CHEMICAL PRODUCT

Product :  Wofasteril® 035
Description :  Highly efficient disinfectant for Haemo-dialyser
Application :  Disinfection of Haemo-dialyser made from acid-resistant
 materials like glass, plastics, etc. and medical devices
 
Product : CITRIN
Description : Citric Acid 30% liquid concentrate for the highly efficient 
citro-thermal disinfection
Application : Outstanding disinfectant and virucidal properties; bacteri
cidal, fungicidal, tuberculocidal and virus-inactivating 
(including Parvovirus, HBV, HCV, HIV)

 

Product : PEROX
Description : Per acetic acid 5% wt.
Application : Effective biocide against wide spectrum of microbiological
contaminations including aerobic and anaerobic bacteria
and their spores easts, moulds, fungi and their spores, and
viruses.
Product : HY-CHLOR
Description : Sodium Hyperchlorite
Application : Adjust bleach product facilities

 

Product : SEPTIC-F
Description : Disinfection product on various surfaces
Application : Use after cleaning and leave for 10 minutes then rinse with water
Do not use on surfaces that may contact with food

 

Product : Residual Peroxide Test Strips
Application : Serim Residual Peroxide Test Strips Provide a quick & convenient
: means of indicating the concentration of peroxide in
aqueous samples. A qualitative estimate of the peroxide
concentration at  or above 1-ppm is indicated by the
appearance of a green or blue color on the indicator pad
 Test Range : A semi-quantitative estimation of the peroxide concentration
between 0-ppm and 10-ppm can be made by comparing
the reacted indicator pad color to the color chart on the
bottle label. Color blocks represent peroxide concentrations
of 0, 1, 3, 5 and 10-ppm
 Test Time : Qualitative - 2 seconds
Semi-quantitative - 17 seconds

 

Product : Hardness Test Kit
Description : Use to test the hardness of water Minimum cut Off : 0.05 ppm

 

Product : Chlorine Test Kit
Description : Use to test the residual chlorine in water Minimum cut Off
0.03 ppm

 

Product : Residual Formaldehyde Test Strips
Application : Serim Residual Formaldehyde Test Strips Provide a quick &
convenient means for indicating low levels of formaldehyde
in aqueous samples.
Test Range : A semi-quantitative estimation of the formaldehyde  concentration
between 0- and 5-ppm can be made by comparing
the reacted indicator pad color to the color chart on the
bottle label. Color blocks represent formaldehyde concentrations
of 0, Trace, 2.5 and 5-ppm.
Test Time : Semi-quantitative - 2 seconds

 

Product : HiSENSE ULTRA 0.1 Test Strips
Application : Serim HiSENSE ULTRA 0.1 Test Strips Provide a convenient
    means for indicating low levels of total chlorine
    (chloramine/free chlorine) in post-carbon water used to
    prepare dialysate. The test can also be used to detect the
    concentration of residual chlorine (chlorine bleach) in the
    solution used to rinse dialysate lines following disinfection
    of hemodialysis equipment.
Test Range : Semi-quantitative estimation of the total chlorine concentration
    between 0- and 3-ppm can be made by comparing the
    reacted indicator pad color to the color chart on the
    bottle label. Color blocks represent total chlorine concentrations
    of 0, 0.1, 0.5 and 3-ppm
    Qualitative estimation of the redidual chlorine bleach
    concentration in the rinse stream can be made by examining
    the indicator pad for the appearance of any pink/purple/gray color.
Test Time : Semi-quantitative - 30 seconds
    Qualitative - 5 seconds

 

Product : Water Hardness Test Strips
Application : Serim Water Hardness Test Strips Provide a quick & convenient
means of indicating the level of hardness (calcium & magnesium)
softening step or other intermediate purification step.
Test Range : A semi-quantitative estimation of the total hardness of
water between 0-ppm and 120-ppm can be made by
comparing the reacted indicator pad color to the color chart
on the bottle label. Color blocks represent hardness levels of
0, 10, 25, 50 and 120-ppm
 Test Time : Semi-quantitative - 11 seconds